Butterfly wishes box from last Monday's show

I used one of the Tim Holtz Ornate Plates as an embellishment with one of the Adage Tickets on a box I decorated for last Monday's Create and Craft show.  It was used on one of the Craft Creations blank boxes that featured on the show. 

Not content at leaving it as it was, I decided to emboss part of it to match the embossing powder I used with one of Kay's flourish stamp designs from Aspects of Design 58 Fancy Flourishes, I dabbed around some of the detail with a Versamark pad and added Moonglow Midnight Teal Obsidian embossing powder, I wiped some of the excess off where I didn't want it before heating.  I then added a little gold embossing powder the same way.

I embossed the butterfly from the Aspects of Design 3 Botanical stamp sheet with the same embossing powder and added a gold curly clip that I had stretched out and cut in half.

I used the Moonglow Mardi Gras set to colour the box.  I spray the stains onto my non-stick craft sheet then dabbed them randomly onto the box with a screwed up piece of copier paper to give a stippled effect.  This works nicely as you get tiny puddles forming.

I added a small piece of card ready for a sentiment or address to be added that has been mounted onto gold mirri card.

It is a shame the photo doesn't show how luscious the colours are!

Jill

PS:  Did you spot the missing curly clip on one of the butterflies... it was lost in transit and I only just spotted it after taking the photo, darn it!

Scrunch paper card and box with Funky Flowers

Here's another card from Saturday's show, this time with the Funky Flowers and Fancy Flourishes stamp sheet designed by Kay Carley.

Sorry this photo is not great, it has a really rich look in real life!  The flower image is stamped onto sticky backed canvas.  I detail painted with the Mardi Gras stains and also flicked the stains onto the canvas to give a speckled look.

The background was made from mopping up the stains from my craft mat when I had been misting, shame to waste it and it gives a lovely distressed look.  I over stamped with one of the flourish stamps.

I used a piece of 12" x 12" paper scrunch to cover the lid and sprayed the base of the box.  I also added a square of scrunched paper inside the lid on this one.

Jill

Dragonfly Music card and box

You may recognise this as the demo I almost finished!  The images are embossed with Moonglow Midnight Gold Obsidian two-tone embossing powder which is a gold/black combination.  The gold is an antique shade, I like using this powder as you get a good impression with it being black but have the soft gold too.  Best of both worlds!

The card is plain at the moment, I may add some embellishment or may just simply add the right wording when it is needed!

The shrink ribbon... ie organza ribbon heated with a heat gun to make it curl, it takes on a different texture and appears wired.  It wasn't until afterwards that I wondered if they thought I was trying to set fire to it.  So, I'd better say, be very careful if you try this at home and if you have a heat gun that throws out a lot of heat, then keep it well above ribbon.  Health and safety lecture over:)  Just be careful!!!

I have scheduled this post and hope it works OK as I am down at Create and Craft filming a live show.

I am filming this show on behalf of Craft Creations, if you enjoy making decoupage cards and would like any of the products they will also be available from them at http://www.craftcreations.com/. 

Although it is something completely different for me, I've actually really enjoyed making all the sample cards for the show.  I am on at noon on Sky 671 or Freeview 36 if you are able to watch the show.  It should be repeated a couple of times and I will post details of the repeats as soon as I know them, so I'll probably post again later when I get home.

Jill

Violin card and box with Mardi Gras Starburst Stains

Another card from Saturday's Create and Craft show.

I love the red and gold sprays in the Mardi Gras set.  I used the gold to add colour to the violin, it is such as rich gold!  The darker background has the dry paper stipple on hammered card, giving it a lovely texture.

I made the box to match, again using the dry paper stipple technique.

I stained the base to match.

I fixed the gold mesh ribbon under the first tabs of the box, adding a little DST at the sides to help keep it in place.

Confession time!  I had a few splodges on the card at back of the base, to hide them I added a square panel that I'd sprayed.

I'll be setting off down to Peterborough shortly, the show will be live at noon tomorrow, on Sky 671 and Freeview 36.  I'll be doing something very different for me!

Jill

Nautical boxed card from Saturday's show

The light is not brilliant for taking photos today, but here is one of the cards/boxes that featured in the show.

I used the Gator Gumbo Olive from the Mardi Gras set with the cling film technique on the top of the box and sprayed the bottom half of the box.

You can see how the box folds inside, I initially thought all they all folded under into themselves but this is a much better way of making them.  It really is worth following the instructions for the first box, then they are easy peasy every time.  You don't need to use glue or cut anything, just fold them.

The next couple of pictures show the pattern of the cling film technique. 

I used Moonglow Midnight Teal Obsidian embossing powder to emboss all the designs.

I wanted to put a gold embellishment, such as a ship or anchor charm on the bottom LHS of the card, but could I find one?  No... I will have to find one before I can finish the card properly.  I like to use buttons and have some somewhere with an anchor, they will turn up eventually I'm sure.

I used the dry paper stipple on the background before stamping the script randomly with brown Stazon.  I folded the edges around a paintbrush to make a scroll for the wording.

 

 

One of the demos I was going to show was a finishing touch to the box lid.  I opened up the box lid and fixed the ribbon ends inside so they were hidden to give a neat finish on the inside of the box lid.
 
I used a plastic button for the centre of the bow, I used wire cutters to remove the shank and fixed it into place with silicone glue.